COBRA EDGE ANCHOR – PPF EDGE SOLUTION | 2.5 L (0.66 US GAL)

Direction :

• Clean Surface: Ensure the PPF installation surface is clean and free from dust, dirt, and contaminants. • Apply Solution: Apply a small amount of COBRA EDGE ANCHOR directly to the adhesive side of the PPF around the edges and corners. • Position Film: Carefully position and wrap the film around the required edges and curves. • Secure Edges: Use a suitable squeegee to press and secure the film firmly into place. • Final Inspection: Remove excess solution and check that all edges are properly finished.

Overview :

• Specialised solution for professional PPF installation. • Designed for finishing edges, corners and complex curves. • Assists with precise film positioning and edge wrapping. • Helps remove minor contamination during installation. • Supports clean, smooth and professional edge finishing. • Suitable for TPU, TPH, TPR and PVC films, subject to compatibility testing. • Helps improve installation efficiency. • Chemical Composition: Ethanol (29.5%), Deionized Water (70.46%), Apple Flavour (0.04%), Fluorescent Yellow Pigment (less than 0.001%).